“Brick PU is Polyurethane based material which is thicker than normal PU. The thicker PU Brick gives an effect of more visual and unique style on your designs. It has a wide application, especially suitable for logo and symbol. It gives your t-shirt design cubic effect,creating more luxurious look, comparing to flat design.
- Cut Brick vinyl with a GX-24 type cutter using a 60° blade at approximately 150 pressure; operate cutter at slower speeds for increased detail.
- Apply Brick vinyl with a heat press set at 300°F and press for 8 – 10 seconds using medium to heavy pressure.
- Warm peel carrier sheet after applying heat.
- Wash garments on a gentle cycle and hang dry or tumble on low (175°F or lower). Do not dry clean.
|APPLIES TO||100% cotton, 50/50 cotton blends|
|BLADE CUT||60° degree blade|
|TEMPERATURE||300° F ( 150° C)|
|PRESS TIME||8-10 seconds|
|CARE INSTRUCTIONS||Gentle cycle machine wash, tumble dry on low (175°F/79°C). Do Not Dry Clean.|