Description
“PUFF PU is a polyurethane based foaming vinyl that makes a self-expansion by heating. It gives your t-shirt design cubic effect,creating more luxurious look, comparing to flat design
Directions
- Cut puff vinyl with a GX-24 type cutter using a 45° blade at approximately 150 pressure; operate cutter at slower speeds for increased detail.
- Apply puff vinyl with a heat press set at 300°F and press for 8 – 12 seconds using to heavy pressure.
- Warm peel carrier sheet after applying heat.
- Wash garments on a gentle cycle and hang dry or tumble on low (175°F or lower). Do not dry clean.
| APPLIES TO | 100% cotton, 50/50 cotton blends |
| BLADE CUT | 45° degree blade |
| CUT PRESSURE | 150 |
| TEMPERATURE | 300° F ( 150° C) |
| PRESS TIME | 8-12 seconds |
| PEEL | Warm |
| CARE INSTRUCTIONS | Gentle cycle machine wash, tumble dry on low (175°F/79°C). Do Not Dry Clean. |
“
Reviews
There are no reviews yet.