20″ Wide Prisma Puff PU Heat Transfer Vinyl – Half Yard Rolls




“PUFF PU is a polyurethane based foaming vinyl that makes a self-expansion by heating. It gives your t-shirt design cubic effect,creating more luxurious look, comparing to flat design


  • Cut puff vinyl with a GX-24 type cutter using a 45° blade at approximately 150 pressure; operate cutter at slower speeds for increased detail.
  • Apply puff vinyl with a heat press set at 300°F and press for 8 – 12 seconds using to heavy pressure.
  • Warm peel carrier sheet after applying heat.
  • Wash garments on a gentle cycle and hang dry or tumble on low (175°F or lower). Do not dry clean.
APPLIES TO 100% cotton, 50/50 cotton blends
BLADE CUT 45° degree blade
TEMPERATURE 300° F ( 150° C)
PRESS TIME 8-12 seconds
CARE INSTRUCTIONS Gentle cycle machine wash, tumble dry on low (175°F/79°C). Do Not Dry Clean.

Additional information

Weight 0.48 lbs
Dimensions 38 × 20 × 0.05 in
Color Selection

Black, White, Red, Royal Blue, Yellow, Green, Navy


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.