“PUFF PU is a polyurethane based foaming vinyl that makes a self-expansion by heating. It gives your t-shirt design cubic effect,creating more luxurious look, comparing to flat design
- Cut puff vinyl with a GX-24 type cutter using a 45° blade at approximately 150 pressure; operate cutter at slower speeds for increased detail.
- Apply puff vinyl with a heat press set at 300°F and press for 8 – 12 seconds using to heavy pressure.
- Warm peel carrier sheet after applying heat.
- Wash garments on a gentle cycle and hang dry or tumble on low (175°F or lower). Do not dry clean.
|APPLIES TO||100% cotton, 50/50 cotton blends|
|BLADE CUT||45° degree blade|
|TEMPERATURE||300° F ( 150° C)|
|PRESS TIME||8-12 seconds|
|CARE INSTRUCTIONS||Gentle cycle machine wash, tumble dry on low (175°F/79°C). Do Not Dry Clean.|