Triangle STA-True Low Bleed 1757 L.B. Royal Blue Plastisol Ink
Sta-True 1700 Series plastisol is formulated for printing on polyester and 50/50 polyester/cotton blends for minimal bleed where normal plastisol films would be discolored due to the fabric dyes bleeding into the screen printed film for the screen printing ink.
Directions For Triangle STA-True Low Bleed 1757 L.B. Royal Blue Plastisol Ink
Stock: Polyester and 50/50 polyester/cotton blends for screen printing ink.
Stencils: All types of solvent resistant emulsions are suitable for screen printing supplies.
Screen Mesh: 110T monofilament is the popular choice, printers may also employ the use of mesh sizes 60T to 160T monofilament or equivalent.
Curing: 315º F TO 330º F depending on the ink deposit, color and dryer efficiency for screen printing supplies.
Wash-up: Press Washes, Ink Degradants, etc for screen print ink.
Mixing Procedures: Stir well before using. For best results, do not add any reducers or additives to these screen printing inks.
Caution: It is necessary to pre-test all fabrics prior to production, due to the various dye application methods. Ink films must be cured properly to give good wash resistance and in some cases to prevent ‘post-bleed’ due to dye solubility. There is a tendency to undercure ink films to prevent dye migration due to heat, but this will only result in other problems. Some fabrics may need to be pre-heated to “set” the dyes – this is not altogether desirable but will produce a more thorough cure due to moisture removal as well for screen printing supplies.
Storage: Store at room temperature. Keep away from heat for these screen printing ink.