Skip to content
This website will be transferred over to https://aaprintsupplyco.com. Your account and all information will be carried over!
This website will be transferred over to https://aaprintsupplyco.com. Your account and all information will be carried over!

Vastex VRS Lite Pin Registration System for Manual Press

by Vastex
$712.00
SKU VT-VRS-L-XX

** Only ships to continental U.S. **

Works with ANY exposing unit and ANY rear clamp manual press.

COMBINATION PINBOARD/PALLET JIG SPECIFICATIONS:

Fits any rear-clamp manual press
21 x 26 in. (53.3 x 66 cm) Combination pinboard/pallet jig constructed of durable heavy gauge steel with anti-rust treatment and easy-to-read instructions printed directly on surface
2 Precision positioning pins
Adjustable side stop for screens 18 to 21 in. (45.7 to 53.3) wide
12 Set-up sheets
Fits pallet widths 14 to 17 in. (35.6 to 43.2 cm)

2 Thumb screws to clamp to pallet
2 Rear positioning stops (fixed)
1 Side positioning stop, adjustable for 18 to 21 in. (45.7 to 53.3) wide screens
Layout graph with guidelines for:

Standard and oversized size shirts
Front left chest
Standard and youth pallet sizes
Image area: 12 x 12 in. (30.1 x 30.1 cm)

Vastex VRS Lite Registration System combines the pinboard and pallet jig into one piece of equipment, with easy-to-read instructions printed directly on the surface.

REGISTERS PRECISELY IN 4 QUICK STEPSThe Vastex Registration System (VRS) is an ultra-fast and -accurate pin registration system that enables anyone to locate positives onto the screens off-press — then locate the screens onto any rear clamp press with all colors in register — in 4 easy steps:

Attach your positives to setup sheets in register, using the alignment grid/pinboard
Locate and attach your positives in register to your screens using a Vastex pin board with screen stops
Burn all your screens on any exposure unit in register
Locate and clamp each screen onto your press in register using the Vastex pallet jig and its corresponding screen stops

— ready to print in less than 3 minutes per screen!

Works with ANY exposing unit and ANY rear clamp manual press.

MAKES MONEY FOR LARGE AND SMALL SHOPS ALIKE

Larger shops can boost output dramatically by moving screen registration from the printing department to the art department!

One-man shops can slash the time and increase the accuracy of screen registration from one to 10 colors!

All shops can:

Cut overall registration time and lost profits by 70% to 90%
Improve registration accuracy and print quality
Reduce rejects
Create a registration standard for your shop — no more guesswork or random placements
Recoup the investment in less than one week

SPECIFICATIONS:

21 ” x 26 ” Combination pinboard/pallet jig constructed of durable heavy gauge steel with anti - rust treatment
Easy-to-read instructions printed directly on surface
2 Precision positioning pins
Adjustable side stop for screens 18” to 21”
Layout graph with guidelines for:

Standard and over-sized size shirts
Front left chest
Standard and youth pallet sizes
Image size: 12" x 12"

12 Set-up sheets
Fits pallet widths 14” to 17”
2 Thumb screws to clamp to pallet
2 Rear positioning stops (fixed)
1 Side positioning stop (adjustable for 18” to 21” wide screen)

Works with ANY exposing unit and ANY rear clamp manual press.

COMBINATION PINBOARD/PALLET JIG SPECIFICATIONS:

Fits any rear-clamp manual press
21 x 26 in. (53.3 x 66 cm) Combination pinboard/pallet jig constructed of durable heavy gauge steel with anti-rust treatment and easy-to-read instructions printed directly on surface
2 Precision positioning pins
Adjustable side stop for screens 18 to 21 in. (45.7 to 53.3) wide
12 Set-up sheets
Fits pallet widths 14 to 17 in. (35.6 to 43.2 cm)

2 Thumb screws to clamp to pallet
2 Rear positioning stops (fixed)
1 Side positioning stop, adjustable for 18 to 21 in. (45.7 to 53.3) wide screens
Layout graph with guidelines for:

Standard and oversized size shirts
Front left chest
Standard and youth pallet sizes
Image area: 12 x 12 in. (30.1 x 30.1 cm)

Vastex VRS Lite Registration System combines the pinboard and pallet jig into one piece of equipment, with easy-to-read instructions printed directly on the surface.

REGISTERS PRECISELY IN 4 QUICK STEPSThe Vastex Registration System (VRS) is an ultra-fast and -accurate pin registration system that enables anyone to locate positives onto the screens off-press ” then locate the screens onto any rear clamp press with all colors in register ” in 4 easy steps:

Attach your positives to setup sheets in register, using the alignment grid/pinboard
Locate and attach your positives in register to your screens using a Vastex pin board with screen stops
Burn all your screens on any exposure unit in register
Locate and clamp each screen onto your press in register using the Vastex pallet jig and its corresponding screen stops

” ready to print in less than 3 minutes per screen!

Works with ANY exposing unit and ANY rear clamp manual press.

MAKES MONEY FOR LARGE AND SMALL SHOPS ALIKE

Larger shops can boost output dramatically by moving screen registration from the printing department to the art department!

One-man shops can slash the time and increase the accuracy of screen registration from one to 10 colors!

All shops can:

Cut overall registration time and lost profits by 70% to 90%
Improve registration accuracy and print quality
Reduce rejects
Create a registration standard for your shop ” no more guesswork or random placements
Recoup the investment in less than one week

SPECIFICATIONS:

21" x 26" Combination pinboard/pallet jig constructed of durable heavy gauge steel with anti - rust treatment
Easy-to-read instructions printed directly on surface
2 Precision positioning pins
Adjustable side stop for screens 18" to 21"
Layout graph with guidelines for:

Standard and over-sized size shirts
Front left chest
Standard and youth pallet sizes
Image size: 12" x 12"

12 Set-up sheets
Fits pallet widths 14 to 17
2 Thumb screws to clamp to pallet
2 Rear positioning stops (fixed)
1 Side positioning stop (adjustable for 18 to 21 wide screen)