Discontinued - DTF with DTG Production Bundle with Epson F2100

It is available in 120V or 240V models equipped with a 20 in. (50.8 cm) wide by 16 in. (40.6 cm) long, 2050 watt heater that carries the same 15-year warranty as all Vastex infrared heaters.

Variable controls for both heat intensity and conveyor speed allow fine-tuning of the drying process according to ink type, ink coverage, desired cure temperature, and rate at which items are being printed.

The heater can be raised, lowered and pivoted using lock knobs on the sides of the heating chamber according to the thickness of printed garments and/or the angle of printed images on irregularly shaped items, for uniform curing of the printed area using minimum energy. Heater shields are included as standard to maximize edge-to-edge temperature consistency for increased image quality.

The compact unit is CE certified and shippable worldwide via UPS, FedEx, DHL and other small package carriers.

Vastex D1000 Entry Level Infrared Dryers Manual

Vastex D1000 Entry Level Infrared Dryers Info

----------------------------------------------------

Ecofreen Mister-T Cyclone Automatic DTF Powder Applicator

Mister T Cyclone Brochure

Mister T Cyclone: for use with DTG Printers

Features:

• Consistent Applying
• Auto Refilling the Powder
• Less Noise
• No Need Air Compressor
• Auto Start with Step Pedal Trigger or Button
• Easy Control Panel
• Laser Sensor
• Heavy Duty Wheels

Specifications:

• Dimensions: 26 inch (W) x 47.2 inch (L) x 76.4 inch (H) (66 cm(W) x 120 cm(L) x 194 cm(H))
• Weight: About 150 kgs (330.7lb)
• Conveyor Belt: 45 cm x 110 cm (17.7 inch x 43.3 inch)
• Lap Time: 
• Standard : 14 sec
• High Production : 8 sec
  
• Power Supply: Free Voltage (110V, 30amps)
• Packing (Wooden Pallet): 36 inch(W) x 57 inch(L) x 80 inch(H) (92 cm(W) x 145 cm(L) x 204 cm(H))

----------------------------------------------------

14x16 Ecofreen Transfer Film (Hot Peel) for Direct to Film - Sheets

NOTE: All Ecofreen films are NOT compatible with STS Mutoh Printers and Prestige High Viscosity DTF Ink

Not compatible with Prestige A3+ Desktop DTF Printer.

Actual Measurement can be slightly different on each batch.

• for 16x20: 15.75" x 19.75"
• for 14x16: 14" x 15.75"

Features:

• After baking the powder, solid white for more vibrant colors
• Even and regular particles for fine graphic quality and good adherence
• Finely coated film for no pinholes!

Instructions:

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease.
3. Hover with a heat press to bake the hot melt powder. (320°F, 3-4min). Or use a curing oven (300-315°F, 1min).
4. Transfer the image by heat press at 285°F for 10sec with medium pressure.
5. Remove the film immediately (gently).
   
6. Heat press again at 285°F for 5sec with medium pressure to enhance softer hand feel and to improve washing durability.

*This product has no affiliation with Epson and is not endorsed by Epson.

*Settings and directions to print DTF with your F2000/2100 using Garment Creator*

• The basic concept for DTF is to print CMYK first then WHITE on top of it. ALWAYS MIRROR YOUR IMAGE FIRST!
• Most of you will be printing onto standard A3 and A4 sheets. Utilize every inch of space as you can to save on time and cost of materials. We call that gang sheeting. One benefit of GC is that it allows multiple images to be uploaded at the same time for printing. Those who order Plastisol Transfers will already know this. The two most common platens I use are 10 x 12 (A2) and 16 x 20 (A3). I place the sheet towards the top middle as a guide and measure how much empty space I have on the sides and bottom because the sheets will be smaller than your platen. I use tape to hold in at least 2 corners to prevent the sheet from shifting while printing.
• Using GC for DTF is very much the same as with DTG. The only difference is you are reversing the cmyk/white color process and mirroring your image.
• If your image has black in it then click on Black Garment. That will prevent GC from printing black unnecessarily.
• For all other colors including white, use (Dark Color).
• After selecting the proper color choice, you need to tinker with your color and white levels. For me personally I use level 2 for color and level 1 for white. I leave ink density to zero. And make sure you leave enough time in between passes in Pause between Passes (sec). This is very important. I like to choose 30-60 seconds
• Under White Management it is very important to check “OFF” first before you print your CMYK pass. This will allow your color layer to go down first.
• After your color pass is done then you go back to white management and click “ON”. Be sure you have enough seconds in your “Pause between passes (sec)” or else your printer will print another CMYK pass right after your white pass. YOU DO NOT WANT THAT! So you MUST manually press cancel on your printer before it does so.

Unfortunately, Garment Creator was not designed for DTF so it is necessary to turn white on and off for every print you do.

WARNING

• Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.

• Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.

NOTE

• DTF (Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results!
• Ecofreen Transfer Film does not require pre-treatment and it uses minimum 75% less DTG inks on to get good quality.
• The designed fabrics or printed shirts have a good wash characteristics.
• The fabric has very slight hand feel touch.
• The process is much faster than Vinyl printing (Vinyl Printer).

 ----------------------------------------------------

DTF Station Hot Melt Powder for Direct to Film

Hot Melt Powder Material Safety Data Sheet

Formulated for use during DTG Transfer (DTF), DTF Station adhesive powder is a crucial part of any DTF printing pipeline. Cover your DTG Transfer media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more!

Features:

• After baking the powder, solid white for more vibrant colors
• Even and regular particles for quality graphics and good adherence
• Finely coated film means no pinholes!

Sizes:

• 1 lb
• 1 kg
• 20 kg

Instructions (for use with DTF Station Hot Peel film):

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease!
3. Hover with a heat press to bake the hot melt powder (340°F, 5min).  Or use a curing oven (300-315 °F, 1min).
4. Transfer the image by heat press at 330°F for 15sec with medium pressure.
5. After the first press,
    Option 1: Wait for 4-6 seconds and remove the film gently
    Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
6. Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel.

*This product has no affiliation with Epson and is not endorsed by Epson.

*Settings and directions to print DTF with your F2000/2100 using Garment Creator*

• The basic concept for DTF is to print CMYK first then WHITE on top of it. ALWAYS MIRROR YOUR IMAGE FIRST!
• Most of you will be printing onto standard A3 and A4 sheets. Utilize every inch of space as you can to save on time and cost of materials. We call that gang sheeting. One benefit of GC is that it allows multiple images to be uploaded at the same time for printing. Those who order Plastisol Transfers will already know this. The two most common platens I use are 10 x 12 (A2) and 16 x 20 (A3). I place the sheet towards the top middle as a guide and measure how much empty space I have on the sides and bottom because the sheets will be smaller than your platen. I use tape to hold in at least 2 corners to prevent the sheet from shifting while printing.
• Using GC for DTF is very much the same as with DTG. The only difference is you are reversing the cmyk/white color process and mirroring your image.
• If your image has black in it then click on Black Garment. That will prevent GC from printing black unnecessarily.
• For all other colors including white,  use (Dark Color).
• After selecting the proper color choice, you need to tinker with your color and white levels. For me personally I use level 2 for color and level 1 for white. I leave ink density to zero. And make sure you leave enough time in between passes in Pause between Passes (sec). This is very important. I like to choose 30-60 seconds
• Under White Management it is very important to check “OFF” first before you print your CMYK pass. This will allow your color layer to go down first.
• After your color pass is done then you go back to white management and click “ON”. Be sure you have enough seconds in your “Pause between passes (sec)” or else your printer will print another CMYK pass right after your white pass. YOU DO NOT WANT THAT!  So you MUST manually press cancel on your printer before it does so.

Unfortunately, Garment Creator was not designed for DTF so it is necessary to turn white on and off for every print you do. 

WARNING

• Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.

• Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.

NOTE

• DTF (Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results!
• Ecofreen hot-melt adhesive powder has excellent bonding and flexibility properties with DTF inks.
• The designed fabrics or printed shirts have a good wash characteristics.
• The fabric has very slight hand feel touch.
• The process is much faster than Vinyl printing (Vinyl Printer).

  ----------------------------------------------------

AA Platen Grip Strips for DTG Transfer (DTF) - 6" x 25'

Grip Strip for DTF Film

• Benefits: Easy to use, no more sliding or curling on the platen, save time and money.
• This saves you from having to tape down your film on the platen. It also speeds up the process of DTG Transfer (Direct to Film - DTF). Say goodbye to a lot of wasted time with this simple tool!

• Easy to use - cut to size with scissors.
• Adhesive on both sides.
• 6" wide strips secure mats or media from 27" to 12' wide.
• Use up to 2,000 prints*

Material:

• Adhesive: Water based
• Backing: Open weave cellulose fabric

Instructions:

1. Surfaces must be thoroughly clean and dry.
2. Cut strips to fit outline of media or mat.
3. Firmly press strips to platen or underside of media or mat.
4. Remove liner and secure media or mat to platen.

WARNING

• Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer "breathes" in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty.

• Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous.

**Residue cleans off surfaces with a citrus based cleanser.

*Actual usage will vary upon conditions.

 ----------------------------------------------------