on eligible orders over $150
on eligible orders over $150
Gfp Matte2 mil BOPPNon-reflective to eliminate glare Linerless Polypropylene Film
Non-Reflective to eliminate light glare Pressure Sensitive Over-Laminates
Crystalline surface to minimize glare UL 410 approved for floor graphics Pressure Sensitive Over-Laminates Gfp Film Overlaminates - the critical fi...
View full detailsCrystalline surface with added rigidity UL 410 approved for floor graphics Pressure Sensitive Over-Laminates Gfp Film Overlaminates - the critica...
View full detailsGfp White Mount 3 Mil White Polypropylene White carrier for added opacity Reduces color shift on Black Gatorboard Sensitive Mounting Adhesives
The Viva Decor Glitz Up is a 2-in-1 hotfix applicator that can fix rhinestones, studs, and nailheads of all shapes and sizes. Using a vacuum suctio...
View full detailsGraphtec 25' 25-25 Pin Serial RS-232-C Cable 56040-006
Ballpoint Pen Adapter for Graphtec CE Lite-50 Ballpoint pen adapter diameter 8 - 11.3 mm. for Graphtec CE Lite-50.
Graphtec Black Ballpoint Pen, 10 Pens/PK KB700-BK Oil based pen 0.7 point (KB700-BK), 10 pens/pack Compatible with: Graphtec PHP34-BALL pen holder ...
View full detailsGraphtec Blade Holder 0.9MM Blue Top, Black Abs Tip for CB09UA Blades (PHP32-CB09N-HS)
Compatible with blades: CB15U, CB15U-K30*, CB15U, CB15UA, CB15U-K301.5mm** Blade-holder with a red top, and brass tip for CB15 blades. These brass ...
View full detailsGraphtec Blade Holder CB15 Compatible with blades: CB15U, CB15U-K30*, CB15U, CB15UA, CB15U-K301.5mm** Blade-holder with a red top, and brass tip fo...
View full detailsGraphtec Blade Set for CE LITE-50 Graphtec standard or long blade set for the CE-Lite-50 vinyl cutter. Replaces the original blade set that came wi...
View full detailsGraphtec Carrier Sheets (13.7"x 20.7") for CE LITE-50 Carrier Sheets 13.7" x 20.7" for the media without mount adhesive area. This carrier sheet c...
View full detailsThe Graphtec CE6000 Supersteel Blade delivers superior cutting performance with its 0.9mm diameter and 45° angle, enabling precise cuts in a variet...
View full detailsExperience a smooth, precise cut with Graphtec CB09UB-K60 Supersteel Blades. These specialized blades are designed with a 0.9mm diameter and a 30° ...
View full detailsGraphtec CE6000 BLADES (CB15U) is angled at 45° Diameter 1.5mm Supersteel blade for cutting rigid or thicker media, 0.25 mm to 0.5 mm thick. (lamin...
View full detailsGraphtec Supersteel 60° 1.5mm Blades for PHP32/33/35-CB15N-HS bladeholder
The Graphtec High Intensity Supersteel Blades 45° - 1.5mm are perfect for cutting high-intensity reflective films and other harder films. The preci...
View full detailsGraphtec Supersteel Blades are angled 60° Diameter 1.5mm Supersteel Blade for cutting rigid media, 0.25 mm to 0.5 mm thick. And also small detailed...
View full detailsCompatible with blades: CB09UB, CB09UB-K600.9mm Blade-holder with blue top, and brass tip / for 0.9mm CB09 blades. ATTENTION: If you are using CB09...
View full detailsGraphtec CE6000 Blade Holders Ballpoint pen holder for black, oil-based pen (KB700-BK).
Graphtec CE6000 Blade Holders FIBERSTEADTLERF Lumocolor holder.
Graphtec Cross Bar 621831414 for FC9000-160 Compatible With: Graphtec FC9000 Vinyl Cutting Plotter
Graphtec Cross-Cutting Blade for CE Lite 50 Cross cutter or manually cutting from sheets and rolls. Cross-Cutting Blade/Cutter compatible with G...
View full detailsGraphtec Cutting Mat for CE LITE-50 Cutting Mat for Graphtec CE Lite-50 for replacement.
Cutting Mat for Graphtec CE Lite-50 for replacement.
Graphtec Elastic Cord for CE6000 (Anti-Static Strips) Replacement PTFE Cut Strip for Graphtec CE6000.
STAEDTLER LUMOcolor Fiber pens, non-permanent black, 10 pens/pk gives you the versatility of a high quality FINE POINT 0.4mm TIP. Used for plotting...
View full detailsGraphtec PTFE Cutting Mat Replacement for CE6000-40 Genuine replacement PTFE cutting mat for the CE6000 Series of Graphtec cutting plotters. Compa...
View full detailsCompatible with Graphtec FC and CE Series. ~15mm diameter (including rubber wheel) ~12mm diameter (not including rubber wheel) ~4mm diameter opening
Graphtec Set of 4 Magnets with Antistatic Elastic Cord Set of 4 Magnets to be used with Antistatic Elastic Cord Set for Graphtec CE6000.
Sharpie holder with a metal sleeve that can be used on Graphtec FC, FCX and CE series. This is a specialty SHARPIE PEN HOLDER for use such as in th...
View full detailsCross Cutter Standard blade for FC Series
Reusable, replacement Craft ROBO Pro & Craft ROBO Pro II (CE6000-40, CE5000-40, CE3000-40 & CAMEO) cutting/media carrier sheet. This cuttin...
View full detailsUse this 60° 0.9mm Supersteel Blade to cut window tint and other thin films. Made for PHP32-CB09N-HS Grahtec blade holder.
Cross Cutter Supersteel Blade for FC Series
Lead Time: Expect extended lead time. Estimated mid-2024.* *All lead times are subject to change. Essentialware’s Gray Silicone Foam Heat Con...
View full detailsCheck out our blog article on the power of a platen and its various uses in any garment printing pipeline!
Platen Wraps non-stick sheets, rolls, pressing pillows and platen wraps are Triple-Coated with an advanced flouropolymer (PTFE) that out-performs a...
View full detailsNon-stick pressing pillows are top quality, 3 mil, Triple-Coated advanced Fluoropolymer (PTFE) fabric. The only pillow made with 3/4 Inch high temp...
View full details