Skip to content
This website will be transferred over to Your account and all information will be carried over!
This website will be transferred over to Your account and all information will be carried over!

Prestige XL2 DTF Roll Printer

Save $945.00
Original price $20,940.00
Current price $19,995.00

** Current Lead Time: 1-2 Weeks **

DTF Printer Buyer's Guide

Prestige XL2 User Manual

Prestige XL2 Product Overview

Prestige XL2 Maintenance Chart

Find out how you can get 0% Financing for 1 year on this printer here!


The Prestige XL2 is your perfect high-end DTF printer option, with dual printheads, premium print quality, and a smaller size in comparison to other printers with similar performance. Elevate your garment printing pipeline today with the Prestige XL2 DTF Printer, plus save when you bundle with the Seismo A24 Powder Shaker for easier, more efficient DTF printing.

  • Requires On-Site Training (not included)
    • On-Site Setup/Training + Driving Distance includes:

      • One Time Driving Distance within 2 hours  (of Buena Park, CA, 90621)
      • 4~6 Training Hours Onsite
      • Lifetime Virtual Training

      On-Site Setup/Training + Air Travel Domestic includes:

      • One Time Accommodations such as hotel, rental car, flight ticket
      • 4~8 Training Hours Onsite


What's included:

  • Lifetime Technical Support
  • CADlink Digital Factory V11 for DTF Rip Software
  • Limited 1-year warranty on non-consumable parts and limited 6 month warranty on the Printhead up to 2 Printheads*
    • *The use of non-DTF Station ink and film will void any warranties offered for the Prestige XL2 DTF Roll Printer


  • Two i3200 print heads
  • White Ink Management System (WIMS): timed white ink stirring system to circulate and maintain white ink inside printer
  • Head Strike Sensorhelps prevent damage to printhead
    • Auto-Cleaning: when printer is left on, it will automatically maintain and clean printhead
    • Auto Ink Alert System: informs user when ink is running low
    • Automatic Film Sensor: if film runs out/is not detected, stops printing
    • Attachment Station: Perfect for add-ons, such as the Printflo Barcode Automation System
    • Variety of adjustable settings including:
      • Belt Speed
      • Powder Shaking Power
      • Cooling
      • Suction


    • Speed & Efficiency: 2 i3200 print heads make this printer one of the fastest performing DTF printers on the market
    • Compact Size/Smaller Footprint when compared to printers with similar print width and speed


    Print Head  Dual Epson I3200 Printheads (CMYK + WWWW)
    Printing Accuracy 1440/2160/2880dpi
    Printing Speed  4Pass: 12㎡/hour
    6Pass: 9.5㎡/hour
    8Pass: 7.5㎡/hour
    Extra features Front and rear arc plate heating; Platform suction; Anti collision of nozzle; Integrated auto-lifting capping station
    Maximum Print Width  24"
    Printing Interface Gigabit network port
    Operating System Windows 7, Windows 10
    Printing Software

    Digital Factory V11 Direct to Film (DTF) Edition - DTF Edition (24" Wide or Larger)

    Operation Environment Temperature:15℃-30℃ (60 °F-86°F), Humidity:35%RH-65%RH
    Rated Voltage 220
    Rated Current 14A
    Rated Power 1500W
    Dimensions of Printer (LxWxH) Without Attachment Station: 29.5" x 57.5" x 55.5"
    With Attachment Station: 29.5" x 66" x 55.5"
    Dimensions of Packing (LxWxH) 36" x 78" x 62"
    Machine Weight 339 lbs
    Packaging Weight 383 lbs

    The DTF Process:

    DTF direct to Film Process chart
    Advantages of DTF Printing:
      • A great option for small orders.
      • No cutting and weeding required.
      • Crisp, defined edges and images from start to finish.
      • Low cost on waste.
      • Low investment - high reward.


      • All Color T-shirt
      • Sweater / Hoodie
      • Jersey
      • Canvas Bag / Cushion
      • Jeans / Denim Cloth
      • Leather
      • Shoes
      • Pants / Trousers
      • Cap / Mask


      Seismo A24 DTF Powder Applicator and Dryer

      The Seismo A24 DTF Powder Applicator and Dryer unit can cure DTF film rolls up to 30 inches wide and is compatible with all roll to roll Direct to Film printers. This machine has 220 volts, 21 amps and requires hardwire. (Please communicate with your electrician to install this product).


      • 42.52 inch Heater: Longer heater/dryer than other dryers to accommodate Faster DTF roll-to-roll printers. 
      • Compact Size: Smaller in comparison to other DTF powder applicators, without sacrificing quality or performance.
      • Advanced Built-in HEPA 2 Layer Air Filters filter out any fumes from DTF powdering. These low maintenance, easy-to-replace filters keep your working environment clean and safe.
      • Advanced Film Detector: With the built-in film sensor, the Seismo A24 automatically turns off and on the power station and heating elements. This results in a lower power requirement of 220v 21 Amp (consumes approximately 30% less than the older generation).
      • Advanced powder ventilation within the powder station: Heating fans help reduce any powder build-up in the powdering station, meaning less maintenance for the user.
      • Air vacuum conveyor system: Air vacuums at the front and back of the conveyor keep film from slipping or moving. They also help to align the DTF film to achieve even heating throughout the heater/dryer.
      • Advanced Take-Up System: Additional tension bar to roll up the finished DTF films better.
      • LCD Touch Screen: Easy to monitor and control 

      Warranty: 1 yr warranty on all parts excluding air filter/ purification system (regular maintenance required)

      Actual Dimension: 6.1 x 3.5 x 3.5 ft.


      Power 4KW
      Shaking Powder Motor vibration, automatic powder return-free
      Heating Method Back baking and front baking for speed and consistency
      Take-up and Feed Film Auto-sensing
      Operation Mode Manual/Auto control
      Mesh Belt Drum suction operation mesh belt
      Automatic Deceleration of Film Cutting Prevent deformation of heating film
      Method of Dusting Constant weight automatic sensing
      Shipping Weight 783 lbs.
      Product Dimensions 6.1 x 3.5 x 3.5 ft.
      Package Dimensions 6.5 x 4.3 x 3.6 ft.
      Configuration With All-in-one smoke purifier



      Seismo V24 DTF Powder Shaker and Dryer

      Seismo Shaker and Dryer Maintenance Chart

      Seismo V24

      The Seismo V24 is a DTF Powder Shaker and Dryer with vacuum absorption conveying platform and touch screen display, ideal for high-speed DTF printers with two heads, like the Prestige L2 or Prestige XL2 from DTF Station.


      • With a warming inlet platform, automatic powder dispenser, powder removal paddle, 4 bulb tunnel dryer, and roll up at the end.
      • Color reproduction is improved and protected by infrared drying and heating.
      • Customized powder recycling drawer boosts efficiency.
      • Control of shake powder, dusting, and curing temperature via PID.
      • Powder is evenly distributed thanks to automatic powder feeding.
      • The vacuum absorption conveying platform keeps the printing material secure, preventing bulging, run-offs, and media waste.


      • Simple to use with a touch screen display controller.
      • This all-in-one unit saves time, effort, and money by evenly spreading and melting the required amount of adhesive material directly onto your printed image.


      Maximum Media Width 23.6"
      Functions Shake powder control, dusting control, and curing temperature PID setting
      Heating Element Quartz infrared heat drying tube
      Rewinding Function Automatic induction rewinding
      Heating and Drying Mode Front guide plate heating, upper drying curing
      Cooling Mode 9 fun air cooling (2 raw)
      Machine Size 76.9in x 39.5in x 43in
      Power Shaker and Dryer Weight 528lbs
      Packaging Size 70.5in x 44.1in x 44.5in
      Packaging Weight 638lbs
      Power Supply AC110V, 50hz / 60hz, 1 phase


      Applicable Industries:

      • All Color T-Shirt
      • Sweater / Hoodie
      • Jersey
      • Canvas Bag / Cushion
      • Jeans / Denim Cloth
      • Leather
      • Shoes
      • Pants / Trousers
      • Cap / Mask

      Compatible With


      Purifier S

      The Purifier S is a mid-range air purifier, perfect for use with your direct-to-film printer and shaker/oven setup. Use the easily turnable knob to control the vacuum speed of the purifier to suit your specific needs. Remove smoke, dust, and harmful gases through the over 6 foot long exhaust hose! With the Purifier S, your air quality is in safe hands.


      • Mid-range purifier
      • Easily control vacuum speed by turning the knob
      • HEPA and Carbon filters
      • 6 foot long hose


      • Remove air pollutants created during the direct to film process
      • Ensure safe working environment

      Compatible With

      • DTF Station Prestige L2 DTF Printer
      • DTF Station Prestige XL2 DTF Printer