Prisma Standard Heat Applied Vinyl (Full roll)


All American’s Heat Applied Vinyl for 100% cotton T-shirts and 50/50 cotton blends.

You can  also Buy By The Yard



Make long-lasting decals for t-shirts, hats, hoodies, bags, and more with All American Heat Applied Vinyl. Cut designs out then a vinyl cutter and then heat press them onto fabric to create popular and inexpensive apparel. All American vinyl is available in a wide variety of colors including neon and metallic. Vinyl available by the 55 yard roll.


  • Cut vinyl with a GX-24 cutter using a 45° or 60° degree blade at approximately 120 pressure.
  • Apply to fabric with a heat press set at 350°F (177°C) for 8 – 10 seconds using medium to heavy pressure.
  • Cold peel the carrier sheet after pressing is complete.

Heat Applied Vinyl Colors:

Vinyl Swatches-01


APPLIES TO 100% cotton, 50/50 cotton blends
BLADE CUT 45° or 60° degree blade
TEMPERATURE 350° F ( 177° C)
PRESS TIME 8-10 seconds
  • Turn the garment inside-out & wash on Gentle Cycle in lukewarm water using mild detergent.
  • Hang or Tumble dry at temperatures lower than 175°f (79°C)
  • Do Not Iron directly over vinyl transfer.
  • Do Not Dry Clean.

Additional information

Weight 23 lbs
Dimensions 21 × 7 × 7 in
Color Selection

Reflective, Black, White, Red, Yellow, Golden Yellow, Navy, Gray, Sky Blue (Light Blue), Green, Royal Blue, Orange, Purple, Brown, Pink, Burgundy, Metallic Gold, Silver, Neon Yellow, Neon Orange, Neon Pink, Neon Green, Neon Blue, Glow in the dark, Pieces

Vinyl & Foil:

All Vinyl & Foil, Standard Heat Transfer Vinyl

You may also like…